Assure your PV Investment: Quality Control & Consulting Expertise
We boost your solar energy initiatives by providing comprehensive technical, engineering, financial, and strategic advisory support throughout their entire lifespan.
Testing Laboratory
We don’t just keep up with the solar industry; we set the new standards. Our company counts with the first laboratory in Europe accredited for field measurement of the entire PV generation system.
We offer comprehensive quality control testing for every component of your PV plant, including modules, inverters, trackers, and cabling. Whether on-site or in our advanced facilities, all tests are conducted to uphold the highest standards before or after installation. You can trust that your solar investment is in expert hands, ensuring its quality throughout the over 35 years of operation of the PV plant and advancing sustainable energy solutions.
We perform our tests during all the operational phases: SAT, Commissioning, Operational phase, and in end of warranty.
PV modules
· Visual inspection
· Electroluminescence
· STC power – Monofacial PV modules*
· STC power – Monofacial PV strings*
· Thermographic inspection
· Withstanding test
· Degradation test*
· Temperature coefficients*
· STC power – Bifacial PV modules
· STC power – Bifacial PV strings
· Bifaciality test*
· LID test
· PID test
* ISO 17025 accredited procedures.
Inverters and BoS
Inverters
· Conversion efficiency*
· MPPT evaluation
· Derating analysis
· AC signal quality
· Thermographic inspections
Trackers
· Analysis of the tracking algorithm
· Backtracking optimization
· Optimization for irregular slopes
Batteries
· Efficiency test
· Capacity test
* ISO 17025 accredited procedures.
PV plants
· PR test – Monofacial PV plants*
· Energy performance test – Monofacial PV plants*
· PR test – Bifacial PV plants*
· Energy performance test – Bifacial PV plants*
· End o Warranty audits
· Availability evaluation
· Albedo characterization*
· Thermographic inspections
· Pyranometer calibration
· Reference module calibration*
* ISO 17025 accredited procedures.
PV modules
- Visual inspection
- Electroluminescence
- STC power – Monofacial PV modules*
- STC power – Monofacial PV strings*
- Thermographic inspection
- Withstanding test
- Degradation test*
- Temperature coefficients*
STC power – Bifacial PV modules
STC power – Bifacial PV strings
Bifaciality test*
LID test
PID test
* ISO 17025 accredited procedures.
Inverters and BoS
Inverters
- Conversion efficiency*
- MPPT evaluation
- Derating analysis
- AC signal quality
- Thermographic inspections
Trackers
Analysis of the tracking algorithm
Backtracking optimization
Optimization for irregular slopes
Batteries
Efficiency test
Capacity test
* ISO 17025 accredited procedures.
PV plants
PR test – Monofacial PV plants*
Energy performance test – Monofacial PV plants*
PR test – Bifacial PV plants*
Energy performance test – Bifacial PV plants*
End o Warranty audits
Availability evaluation
Albedo characterization*
Thermographic inspections
Pyranometer calibration
Reference module calibration*
* ISO 17025 accredited procedures.
Trusted by
Consultancy
We provide advisory services in the design phase of your PV plant. Our goal is to ensure component quality, minimize investment risk, and optimize the economic return on your project.
Development
We help you estimate your PV plant production and optimize the design backed by our more than 15 years of experience.
- Productivity studies
- TOY calculations
- Analysis of radiation and temperature models for the site
- Preparation of contractual annexes
Construction & Commissioning
We offer a comprehensive range of services to guarantee the project quality and the fulfilment of technical & contractual specifications.
- Site acceptance tests for PV modules and inverters
- Commissioning tests
- STC power campaigns for mono and bifacial modules
- Accredited performance tests
- PV plant characterization
- Warranty claims
Operation
From data-driven performance audits to rigorous compliance evaluations, we leave no room for uncertainty.
- Performance audits based on historical operating data.
- Evaluation of compliance with contractual requirements.
- Comparison and evaluation of plant performance against initial estimates.
- Loss chain evaluation.
Banking & Financing
Our Advanced Quality Control Procedures allow improving financing conditions thanks to a performance uncertainty decrease and a better risk identification & mitigation strategy.
Development
We help you estimate your PV plant production and optimize the design backed by our more than 15 years of experience.
- Productivity studies
- TOY calculations
- Analysis of radiation and temperature models for the site
- Preparation of contractual annexes
Construction & Commissioning
We offer a comprehensive range of services to guarantee the project quality and the fulfilment of technical & contractual specifications
- Site acceptance tests for PV modules and inverters
- Commissioning tests
- STC power campaigns for mono and bifacial modules
- Accredited performance tests
- PV plant characterization
- Warranty claims
Operation
Where precision meets performance. From data-driven performance audits to rigorous compliance evaluations, we leave no room for uncertainty.
- Performance audits based on historical operating data.
- Evaluation of compliance with contractual requirements.
- Comparison and evaluation of plant performance against initial estimates.
- Loss chain evaluation.
Banking & Financing
Our Advanced Quality Control Procedures allow improving financing conditions thanks to a performance uncertainty decrease and a better risk identification & mitigation strategy.
Consultancy
We provide advisory services in the design phase of your PV plant. Our goal is to ensure component quality, minimize investment risk, and optimize the economic return on your project.
Development
We help you estimate your PV plant production and optimize the design backed by our more than 15 years of experience.
- Productivity studies
- TOY calculations
- Analysis of radiation and temperature models for the site
- Preparation of contractual annexes
Construction & Commissioning
We offer a comprehensive range of services to guarantee the project quality and the fulfilment of technical & contractual specifications.
- Site acceptance tests for PV modules and inverters
- Commissioning tests
- STC power campaigns for mono and bifacial modules
- Accredited performance tests
- PV plant characterization
- Warranty claims
Operation
From data-driven performance audits to rigorous compliance evaluations, we leave no room for uncertainty.
- Performance audits based on historical operating data.
- Evaluation of compliance with contractual requirements.
- Comparison and evaluation of plant performance against initial estimates.
- Loss chain evaluation.
Banking & Financing
Our Advanced Quality Control Procedures allow improving financing conditions thanks to a performance uncertainty decrease and a better risk identification & mitigation strategy.
Explore all our solutions
Consulting / Testing
Our ISO/IEC 17025 accredited laboratory and expert consultancy services.
PVet Data Analytics
Cutting Edge Data Analytics for PV plants.
PV Scada System
Specific Scada system for PV plants with our own PPC.
Entec Testing Equipment
Entec’s line of products for
solar energy industry.
Knowledge Hub
Find more about: